PM Bronze
Cu-90, Sn-10
CT-1000-13

PM Nickel-Silver
Cu-64, Ni-18, Zn-18
CNZ-1818-17

PM Nickel-Silver
Cu-64, Ni-18, Zn-16, Pb-2
CNZP-1816-13

PM Brass
Cu-90, Zn-10
CZ-1000-11

PM Brass
Cu-78, Zn-20, Pb-2
CZP-2002-12



As- Sintered
Heat Treated
PM Iron
Fe, 99, C-0.2
F-0000-20

PM Steel
Fe, 98, C-0.8
F-0008-35
F-0008-85HT
PM Copper Steel
Fe, 96, Cu-2, C-0.8
FC-0208-60
FC-0208-95HT

PM Nickel Steel
Fe, 96, Ni-2, C-0.5
FN-0205-35

PM Infiltrated Iron
Fe, 78, Cu-20
FX-2000-25


PM Infiltrated Steel
Fe, 77, Cu-20, C-0.8
FX-2008-60
FX-2008-90HT
PM Phosphorus Iron
Fe, P-0.45
FY-4500-20W


PM Stainless Steel
AISI 31 6 (modified)
SS-316N1-25


PM Stainless Steel
AISI 410 (modified)
SS-410-90HT


PM 4600 Steel
AISI 4600 (modified), C-0.5
FL-4605-45
FL-4605-140HT

PM 4200 Steel
AISI 4200 (modified), Ni-1.5, C-0.5
FLN-4205-40
FLN-4205-105HT


  • Threaded Nuts
  • Sleeves
  • Bushings
  • Spacers
  • Gears
  • Cams
  • Sprockets
  • Counter Weights
  • Hubs
  • Pawls
  • Ratchets
  • Pulleys
  • Vane Pump Parts
  • Fishing Reel Parts
  • Flanges
  • Flanged Bushings
  • Rollers
  • Side Links
  • Stop Valve Parts
  • Self Lubricating Bearings
  • Bearings
  • Hex Nuts
  • Cores
  • Drive Wedges
  • Shock Pistons
  • Hydraulic Components


COMPACTING

479 Buena Vista Highway, Wilcox  PA  15870

Complete Code for Material, Composition & Minimum Strength (10 psi)

Material

  • Bases
  • Base Plates
  • Crimpers
  • Chain Roller
  • Idler Bushings
  • Spur Gears
  • Sun Gears
  • Blade Adapters
  • Latches
  • Cranks
  • Housings
  • Rail Guides
  • Blade Holders
  • Cam Pins
  • Stator Cores
  • Set Collars
  • Collars
  • Washers
  • Sleeves
  • Retainer
  • Keys
  • Pivots
  • Wedges
  • Eccentric
  • Shaft Collars
  • Shaft Couplings and Adapters


MATERIALS

Cameron Diversified Products is ready to aid you in designing your product to meet your needs. Being involved early in a components life will allow us to keep your design powder metal friendly, saving you time and money.


When you are ready to prototype your design work, CDP can help you in many ways. We can either provide you with a Powder Metal slug for you to machine your own part, or supply you with a fully machined product.

Prototyping

Sizing or Coining improves strength and/or achieves tighter tolerances 

SIzing and/or Coining

Secondary operations

Examples of MPIF Material Designation Coding

Our Services

Nominal Compositions by percent


Platings Available:

Coatings Available:

Tooling Development

engineering and design

(814) 929-5834    Toll Free: (800) 545-4222   Fax: (814) 929-5961

Powder Metal Part

Cad Model

  • Dacromet®
  • DeltaTone 9000®
  • Delta Protekt®
  • Doerken
  • EcoGuard™
  • Empiguard®
  • Geomet®
  • Magni MolyKote®
  • PPG™
  • Sermagard®
  • Xylan®
  • Xylar®
  • ZnCoat®

SINTERING

  • Presses range from 10 to 660 tons
  • High production runs
  • Short production runs
  • Short lead times
  • Parts as small as 1/8" diameter and up to 10"


Cameron Diversified Products

Supplier of precision Engineered Components

  • Wire EDM
  • Sinker EDM
  • CNC Mill
  • CNC Lathe
  • Surface Grinders
  • Lathes
  • ID and OD Grinders
  • Hones
Cameron Diversified Products also offers complete computerized engineering capabilities to provide quality tooling. All of our tooling is designed in-house by our full service Design Engineering Department.  Cameron Diversified Product's “in house” tool shop is supplemented by outside tooling sources to assure expedited service and “On Time” deliveries.
Cameron Diversified Products offers an experienced product & tool design service to aid part designs, material selection and offer consistent lower pricing on your production part requirements.

Our factory houses two continuous belt sintering furnaces with protective gas atmospheres and an operating temperature up to 2100° F 

  • Farm & Agriculture
  • Lawn & Garden
  • Hand Tools
  • Power Tools
  • Ammunition Reloading
  • Recreational Vehicles
  • Fishing
  •  Aerospace
  • Aftermarket Automotive

Industries Served

We have a complete in-house Tool Department including:

  • Electrodeposited Zinc
  • Clear Chromate
  • Yellow Chromate
  • Black Chromate
  • Olive Chromate
  • Clear Sealer
  • Black Sealer
  • Zinc Phosphate
  • Manganese Phosphate
  • Hydrogen Bake-Out
  • Stainless Passivation

Cameron Diversified Products Specializes in a wide variety of parts

  • CNC Machining
  • CNC Turning
  • CNC Milling
  • CNC Tapping
  • Honing
  • Deburring
  • Burnishing
  • Rollorizing
  • Double Disc Grinding
  • Resin Impregnation - used to improve the machinability of a PM Part and to seal up the porosity before plating.
  • Heat Treatment
  • Steam Treatment
  • Rust Inhibiting Oil Dip
  • Vacuum Oil Impregnation - fills porosities with oil for lubricity, wear resistance and corrosion protection
  • Plating's
  • Coatings
  • Iron
  • Carbon Steel
  • Low Carbon, Heat Treated Steel
  • High Carbon Steel
  • High Carbon, Heat Treated Steel
  • Copper Iron
  • Low Carbon Copper Steel
  • Low Carbon, Heat Treated Copper Steel
  • High Carbon Copper Steel
  •  High Carbon, Heat Treated Copper Steel
  • Iron-Nickel
  • Nickel Steel
  • Low Alloy Steel
  • Copper Infiltrated Iron and Steel
  • 300 Series Stainless Steel
  • 400 Series Stainless Steel
  • Brass
  • Bronze
  • Special Alloys